[vc_row css=”.vc_custom_1695289427097{padding-bottom: 40px !important;}” conditional_render=”%5B%7B%22value_role%22%3A%22administrator%22%7D%5D”][vc_column][vc_column_text]

Crestaform Tough 3D Printing Resin

Crestaform Tough by Scott Bader, stands as an engineering-grade 3D printing resin tailored for design and prototyping purposes. Renowned for its robustness, rigidity, and resilience, it mirrors the characteristics of ABS-like materials while mitigating crack propagation.

Designed with versatility in mind, Crestaform Tough is meticulously formulated to be compatible with a broad spectrum of UV LCD and DLP 3D printers that welcome third-party resins. This 3D printing resin is celebrated for its outstanding mechanical performance and rapid reactivity, making it suitable for a wide array of applications.

When subjected to post-curing within a temperature-assisted UV light environment, Crestaform Tough consistently delivers sturdy and durable prints.[/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1695289434062{padding-bottom: 40px !important;}” conditional_render=”%5B%7B%22value_role%22%3A%22administrator%22%7D%5D”][vc_column width=”1/2″][vc_column_text]

Key Benefits

• Excellent mechanical performance
• High reactivity and printing speed
• Rigorously tested to ensure optimal performance
• Globally available technical support
• Scott Bader is a reputable manufacturer with over 100 years of experience and expertise

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

How To Use Crestaform Tough

• Always shake or mix the resin thoroughly before use.
• Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model • make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank.
• If not used for a long time, please filter the resin and pour the resin into the storage container.

[/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1697799387665{padding-bottom: 40px !important;}” conditional_render=”%5B%7B%22value_role%22%3A%22administrator%22%7D%5D”][vc_column width=”1/2″][vc_column_text]

Recommended Cleaning

• Soak the print in a clean IPA bath for a minimum of 2 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print.
• Leave the print to dry off any residual solvent prior to post-curing.

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Recommended Post-Curing

• Post-cure as soon as possible after completion of printing.
• Post-cure every print for a minimum of 10 minutes under a dedicated UV curing lamp operating at 385-405 nm wavelength. Alternatively, you can leave the print to cure for a minimum of 2 hours under direct sunlight.
• Temperature-assisted UV curing will increase the rigidity of the print.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Typical Printing Parameters*

*For DLP printers, it is recommended that light power is reduced to around 2.5mW/cm2[/vc_column_text][/vc_column][/vc_row]

Weight	1 kg